STANDARD NO SHAFT ENCODER EDH 581


Optischer inkrementale Drehgeber mit durchgehender Hohlwelle

Codeur optique incrémental avec axe creux

Optical incremental encoder with hollow shaft


Auflösung
Impulse/Umdrehung
Résolution
impulsions/tour
Resolution
pulses/revolution
 
Jede Auflösung von  1 - 6000, 7000, 7200, 7500, 8000, 8192, 9000, 9144, 10000, jede andere Impulszahl bis  500.000 auf Anfrage
Every resolution from  1 - 6000, 7000, 7200, 7500, 8000, 8192, 9000, 9144, 10000, every other resolution up to  500.000 on request
 
Typenerklärung
Désignation
Type explanation
EDH 
581-
6-
2500-
05-
D-
S
C12
/Ø10
 
 
               
   
  3
   
  30
  P
   
   
   
Inkrementaler Drehgeber
mit Hohlwelle
Codeur incrémental
avex axe creux
Incremental encoder
with hollow shaft
Gerätedurchmesser Diamètre de l’appareil Package diameter
Anzahl der Ausgangskanäle Nombre de canaux de sortie Number of output channels
Auflösung Impulse/Umdrehung Résolution en impulsions/tour Resolution in pulses/revolution
Speisespannung Tension d’alimentation Power supply voltage
Ausgangstreiber Amplificateur de sortie Output driver
Kabelanschluß seitlich Sortie latérale Exit at side
Stecker, 12-polig Connecteur, 12 broches Connector, 12 pins
Durchmesser Hohlwelle Diamètre de l’axe creux Diameter of hollow shaft
Auswahltabelle
Tableau de sélection
Selecting table
Anzahl der Ausgangskanäle Nombre de canaux de sortie Number of output channels
3
=A + B + M
6
=AA + BB + MM
Speisespannung Tension d’alimentation Power supply voltage
05
=5 VDC ± 5%
30
=10..30 VDC
Ausgangstreiber Amplificateur de sortie Output driver
P
=Push-Pull
D
=RS 422 line driver
S
=1 Vss Sine/Cosine
Kabelabgang seitlich Sortie de câble latérale Cable outlet at side
S
Stecker Connecteur Connector
C12
=12 pins standard
C07
=7 pins Binder
Ausgangskanäle Canaux de sortie Output channels  

p
a, b, c, d
=
=
360°
90° ±10°
p
f
g
=
=
=
360°
90° ±10°
90 - 360°


Technische Daten
Caractéristiques
techniques
Technical Data
 
Mechanische Werte
Caractéristiques mécaniques
Mechanical data
Drehzahl Vitesse de rotation Rotational speed < 10000 min-1
Drehmoment Couple Torque < 1 Ncm
Losbrechmoment Moment d’inertie Breakaway torque < 3 Ncm
Belastung der Kugellager Capacité de charge des
roulements
Loading of bearings 20 N radial
10 N axial
Winkelbeschleunigung Accélération angulaire Angular acceleration < 104 rad/sec2
Gewicht Poids Weight < 0,5 kg
Umgebungsbedingungen
Conditions ambiantes
Environmental conditions
Vibration Vibrations Vibration 200 ms-2 (20 ... 2000 Hz)
Beschleunigung Chocs Shock 2000 ms-2 (11 ms)
Arbeitstemperatur Température de travail Operating temperature 0 .. +80°C standard
-20 .. +110°C optional
-42 .. +110°C optional
Luftfeuchtigkeit Humidité de l’air Atmospheric humidity < 85% r.h.
Schutzart Protection Protection IP 65 (DIN 40050/IEC 144)
IP 67
Elektrische Werte
Caractéristiques électriques
Electrical data
Optisch, berührungslos Optique, sans contact Optical, without contact
Sender, Infrarot Émetteur, infrarouge Transmitter, infrared LED
Empfänger Récepteur Receiver Photo-Transistor
Messgenauigkeit Exactitude de mesure Measurement accuracy ± 1' standard
± 10'' optional
Speisespannung Tension d’alimentation Supply voltage Vcc = 5 VDC ±5%
Vcc = 10...30 VDC
Stromaufnahme Consommation de courant Power consumption 200 mA max.
Ausgangsfrequenz Fréquence de sortie Output frequency < 300 kHz (Output D)
< 160 kHz (Output P, S)
Signalpegel Niveau du signal Signal level High > Vcc -2 V (Output D, P)
Low < 0,5 V (Output D, P)
Analog 1 Vss (Output S)
Belastbarkeit der Ausgänge Capacité de charge des sorties Load capacity of the outputs 20 mA
Elektrische Anschlüsse
Connections électriques
Electrical connections
siehe Typenschild voir plaque ident see name plate Kurzschlußfest und
verpolungssicher
Ausgangstreiber Amplificateur de sortie Output driver  
 
Massbild Encombrement Outline drawing mm
EDH 581

INDUcoder Messtechnik GmbH, Postfach 18 03 49
47173 Duisburg, Deutschland
Tel: (0203) 57047-0, Fax: (0203) 57047-20
E-Mail: aibncfdoe@fignhdiujckoldmenropdres
Technische Änderungen vorbehalten. Veröffentlichung der hier gezeigten Dateien nur mit schriftlicher Genehmigung der INDUcoder Messtechnik GmbH.