SSI DISPLAY MODULES MOD 14

Anzeigemodule mit programmierbaren Ausgängen für absolute Winkelcodierer mit SSI-Schnittstelle

Module avec sortie programmer par Codeur optique absolu avec SSI-interface

Display with programmable outputs for Absolut-Encoder with SSI-Interface

MOD 14 - a programmable multifunctional display module for absolute encoders with SSI-Interface. Single-turn or multi-turn encoders with a resolution up to 25 bit and Gray-Code are suitable for operation. Display parameters are fully programmable. MOD 14 has the usual standardfunction of a display modul, but additional four control outputs, which can be programmed separately as comparator, cam switch or pulse switch. Easy programming by four front-panel keys.


SSI-Interface

For operation of absolute single- or multiturn-encoders with resolution up to 25 bit with serial SSI-Interface.

Display-Scaling

Scale factor, adjustment values and counting direction are free programmable.

Control-Inputs

Optically insulated control-inputs for electronic adjustment and storage of indicated value.

Control-Outputs

4 optically insulated control-outputs, which can be programmed separately as a comparator, cam switch or pulse switch.

Analogue-Outputs

2 optically insulated programmable analogue-outputs with resolution of 14 bit.

Parallel-Interface

Optically insulated in- and outputs for parallel data in/out in Binary-, Gray or BCD-code. Through parallel inputs values for electronic adjustments or set off against the indicated value can be read in. Parallel outputs are useful for data output of the indicated value.

RS 485-Interface

Serial interface RS 485 for external control of all function of display modules MOD 14.

Product description MOD 14


SSI-Interface  
Display-Scaling    
Control-Inputs    
Control-Outputs    
Analogue-Outputs    
Parallel-Interface    
RS 485-Interface    
   
MOD 14-1      
MOD 14-2    
MOD 14-3    
MOD 14-4  
MOD 14-5    
MOD 14-6  
MOD 14-7  
MOD 14-8

Technical Data
Supply Voltage +10 ... 35 VDC
Power Consumption <250 mA (<150 mA at 24 VDC)
Cycle time 5 ms
Display range -9999999 ... 99999999
Display 8 digit 7-segment red LED
14 mm high
Datamemory EEPROM
Operating temperature 0 ... +50°C
Connections Terminal block, max. 1,5 mm2
Sub-D-Connector
Weight < 0,6 kg
Protection front IP 50
with protective cover IP 54
rear IP 20
SSI-Interface
Clock frequency 125 kHz
Clock-Output RS485
Clock-Input Optocoupler RS485
Control-Inputs
Circuit Optocoupler
Input-Level Low 0 ... +5 VDC
Input-Level High +10 ... 35 VDC
Input-Resistance 1,8 kOhm at 24 VDC
Control-Outputs
Circuit Optocoupler
Power supply max. +35 VDC
Output-voltage min. Vcc -3,5 V at 50 mA
Output-current max. 50 mA
Analogue Voltage-Output
Voltage Range -10 ... +10 VDC
Resolution 1,22 mV = 14 Bit
Offset-Error max. 1 mV at 25°C
Output-current max. 10 mA, short-circuit proof
Analogue Current-Output
Current Range -20 ... +20 mA
Resolution 2,44 µA = 14 Bit
Offset-Error max. 2 µA at 25°C
Burden max. 550 Ohm
Parallel-Inputs
Circuit Optocoupler
Input-Level Low 0 ... +5 VDC
Input-Level High +10 ... 35 VDC
Input-Resistance 6,8 kOhm at 24 VDC
Parallel-Outputs
Circuit Optocoupler, NPN-Transistor
Open-Emitter with PTC
Supply Voltage max. +35 VDC
Output Voltage min. Vcc -3,5 V at 50 mA
Output Current max. 50 mA
RS485-Interface
Circuit RS485
Electrical connection diagram
Zoom
Electrical connection - Rear panel


Outline drawing



INDUcoder Messtechnik GmbH, P.O. Box 18 03 49
47173 Duisburg, Germany
Phone:+49 203 57047-0, Fax:+49 203 57047-20
Email: aibncfdoe@fignhdiujckoldmenropdres
Technical changes to alteration. Publication of the shown data only with written authorization of INDUcoder Messtechnik GmbH.