ENCODER APPLICATIONS


STANDARD ENCODER

Incremental encoder up to 500.000 pulses per revolution.

Absolute single-turn encoder up to 65.536 steps per revolution.

Absolute multi-turn encoder up to 65.536 steps per revolution, a measuring-scale of 16.384 revolutions and synchron-serial-Interface (SSI) or all common fieldbus interfaces, e.g. Profibus, Interbus-S, CANbus, Device Net.



DOUBLE-/ TRIPLE ENCODER

Redundant Encoder Systems featuring two standard encoders. High degree of operational reliability due to seperated power supplies and seperated signal lines.

Combination of standard incremental and absolute encoder. Absolute encoders with a resolution up to 16 bits per revolution and 30 bits total measuring range can be combined with incremental encoders with resolution up to 500.000 pulses per revolution. The illustration on the right shows a triple encoder featuring two incremental hollow shaft encoder and one absolute encoder.

Combination of digital and analogue encoder. Encoder-combination with centrifugal force controller, limit switch gear and special solutions, requested by the customer, are available.

Easy to use: Only one device is needed for different tasks, as measuring of position and velocity at the same time. Complex mechanics with toothed wheels or toothed belts for transmitting rotation to a second encoder are not needed.

The illustration on the right shows a triple encoder with water cooling. Electrical connection with 26 pins MIL connector at rear.

FIELDBUS INTERFACES

AWG-Encoder System for connection to all common fieldbusses:

Profibus DP, Class 1 and programmable to Class 2

Interbus-S, programmable to ENCOM Profil K3

Canbus, programmable to CANopen® or Device Net

Electrical connection to the bus with suitable terminal caps in consideration of the high protection class IP 67.

AWG101 with heavy duty connector

Incremental encoder up to 500.000 pulses per revolution or absolute encoder up to 30 bit total resolution.

AWG101 with attached Marechal - heavy duty connector with front contacts, 16 pins, protection class IP 67. Butt-style pressure contacts and metallic braid guarantee a high quality of contact over time.

AWG102 with through shaft

Operation area: Impartment of rotation to already mounted Robust Encoder Systems, limit switch gears, cam-shaft switches, tachos or other devices, which will take up the rotary motion.

Very solid housing - length of housing only 120 mm, protection class IP 67.

Incremental No Shaft Encoder up to 500.000 pulses per revolution or Absolute No Shaft Encoder up to 16 bit total resolution.


INDUcoder Messtechnik GmbH, P.O. Box 18 03 49
47173 Duisburg, Germany
Phone:+49 203 57047-0, Fax:+49 203 57047-20
Email: aibncfdoe@fignhdiujckoldmenropdres
Technical changes to alteration. Publication of the shown data only with written authorization of INDUcoder Messtechnik GmbH.