|
|
|
Press Release and Product Information
Manual Encoder and Handy Pulser
|
Robust electronic hand-held terminal. Ergonomic designed
case made of ABS synthetics. Manual pulser with 100 pulses
per revolution and switches for axis selection
"X, Y, Z, 4" and factor "x1, x10, x100".
Green luminous control-LED. EHP-EO with additional
Emergency Stop and 3-position Enable Switch.
High protection class IP 65.
Terminal block or spiral cable up to 5 m length
|
|
|
|
Robust electronical Manual Pulse Generator
with ABSOLUTE ENCODER and all common
Interfaces: SSI, Profibus, CANopen®, Device Net,
ETHERNET Powerlink, Interbus, Push-Pull.
Easy integration in already existing fieldbus systems
or direct connection to PLC.
Single-turn with resolution up to 16 bit per revolution
or multi-turn with total resolution up to 30 bit.
Electronic reset and programmable.
Large rotating knob with wear-free magnetic click-stop
and 100 click-stop positions.
High protection class IP 65, extra IP 66.
|
|
|
|
Robust electronic manual pulse generator with
Incremental Encoder. Resolution 20 to 3,600 pulses per
revolution are available. Large rotating knob with
magnetic click-stop and 100 click-stop positions.
Push-pull outputs for direct connection to the PLC.
|
|
|
|
Robust electronic manual pulse generator.
Resolution 1 to 10,000 pulses per revolution
- every number of pulses.
Large rotating knob with magnetic click-stop
and 100 click-stop positions.
RS422 line driver outputs for interference proof
transmission over large distances.
Protection class IP 65 of the front side.
Central mounting for easy installation.
|
|
|
|
Robust electronic manual pulse generator. Resolution 1
to 10,000 pulses per revolution - every number of
pulses. Large rotating knob with mechanical click-stop
and 100 click-stop positions. Push-pull outputs for
direct connection to the PLC. Protection class IP 65.
Cable outlet or connector.
|
|
|
|
Robust electronic manual pulse generator.
Resolution 1 to 10,000 pulses per revolution - every number of pulses.
Mechanical click-stop and crank handle.
Push-pull outputs for direct connection to the PLC.
Protection class IP 65.
Cable outlet or connector.
|
|
|
|
Programmable electronic hand-held terminal with
LCD-display and data input via keyboard membrane-switch array.
Manual pulse generator with resolution of 100 pulses per
revolution. The hand-held terminal is programmable via
the RS 232C interface. Enable switch.
Very flat housing - case height only 31 mm.
Spiral cable up to 5 m. High protection class IP 65
|
|
|
|
Electronic hand-held terminal with very flat housing -
case height only 31 mm.
Manual pulse generator with resolutions of 25 or 100
pulses per revolution. Enable switch, switch for axis
selection "X, Y, Z, 4", switch for factor
"x1, x10, x100", spiral cable with 2, 3 or 5 m
length. High protection class IP 65.
|
|
|
|
|
pdres
