- Compact and simple low-cost type
- Housing of extruded aluminium sheath
- Flexible stainless steel cable Ø 0,8 mm
- Strong spring mechanics
- Precision cable drum
Inkrementaler Weggeber PLE 200
Linear Motion Transducer with 30.000 mm, 40.000 mm and 50.000 mm range, with Standard Incremental Encoder ED 58
Used encoder
Used encoder
Type explanation
PLE 200-500-100/ED58-6-5000-05-D-RC12
| Measuring range | 300 = 30.000 mm |
| 400 = 40.000 | |
| 500 = 50.000 | |
| Number of turns of the encoder shaft | Messlänge in mm / 500 mm |
| Encoder type | Incremental |
| Number of channels | 3 = A + B + M |
| 6 = AA + BB + MM | |
| Supply voltage | 05 = 5 VDC ± 5% |
| 30 = 10..30 VDC | |
| Output driver | D-RS422 |
| P | |
| Position of connection | R |
| S | |
| Connector | C07 = 7 pins Binder |
| C12 = 12 pins M23 | |
| M10 = 10 pins MIL |
Technical data
Close all lists Open all listsMechanical data
| Acceleration of cable | ≤ 20 ms-2 |
| Side movement of cable | ≤ 3° |
| Weight | ≈ 10 kg (PLE200-300-60) |
| ≈ 11 kg (PLE200-400-80) | |
| ≈ 12 kg (PLE200-500-100) |
Environmental conditions
| Vibration | 100 ms-2 (20 ... 2000 Hz) |
| Shock | 200 ms-2 |
| Operating temperature | 0 ... +80°C |
| Storage temperature | -40 ... +80°C |
| Atmospheric humidity | ≤ 95% r.h. |
| Protection class | IP 65 (Standard Encoder ED 58) |
| IP 40 (Mechanic of Linear Motion Transducer) |
Electrical data
| Scanning type | Optical, without contact |
| Transmitter, infrared | LED |
| Receiver | Photo-Array |
| Supply voltage | Vcc = 5 VDC ±5% |
| Vcc = 10...30 VDC | |
| Power consumtion | 200 mA max. |
| Output frequency | ≤ 300 kHz (Output D) |
| ≤ 160 kHz (Output P) | |
| Signal level | High > Vcc -2 V |
| Low < 0,5 V | |
| Load capacity of the outputs | 20 mA |
Cable
| Wire colour | Signal |
|---|---|
| Brown 0,5 mm² | +Vcc |
| Blue | +Vcc Sense 1) |
| White 0,5 mm² | 0 V GND |
| White | 0 V Sense |
| Brown | Signal A+ |
| Green | Signal A- 2) |
| Grey | Signal B+ |
| Pink | Signal B- 2) |
| Red | Signal M+ |
| Black | Signal M- 2) |
| Shield | N.C. |
1) nur bei Vcc = 5 VDC TTL
2) nur bei 6 Ausgangskanälen
2) nur bei 6 Ausgangskanälen
Connector 7 pinsBinder
| Connection | Signal |
|---|---|
| Pin 1 | 0 V GND |
| Pin 2 | N.C. |
| Pin 3 | Signal A |
| Pin 4 | Signal B |
| Pin 5 | +Vcc |
| Pin 6 | Signal M |
| Pin 7 | Shield |
Connector 12 pins M23
| Connection | Signal |
|---|---|
| Pin 1 | Signal B- 1) |
| Pin 2 | +Vcc Sense 2) |
| Pin 3 | Signal M+ |
| Pin 4 | Signal M- 1) |
| Pin 5 | Signal A+ |
| Pin 6 | Signal A- 1) |
| Pin 7 | N.C. |
| Pin 8 | Signal B+ |
| Pin 9 | Shield |
| Pin 10 | 0 V GND |
| Pin 11 | 0 V Sense |
| Pin 12 | +Vcc |
1) nur bei 6 Ausgangskanälen
2) nur bei Vcc = 5 VDC TTL
2) nur bei Vcc = 5 VDC TTL
Connector 10 pins MIL
| Connection | Signal |
|---|---|
| Pin A | Signal B+ |
| Pin B | Signal A+ |
| Pin C | Signal M+ |
| Pin D | +Vcc |
| Pin E | +Vcc Sense |
| Pin F | 0 V GND |
| Pin G | Shield |
| Pin H | Signal B- 1) |
| Pin I | Signal A- 1) |
| Pin J | Signal M- 1) |
Output driver
Outline drawing
Version ZE 621-611 · Subject to change