- Compact and simple low-cost type
- Housing of extruded aluminium sheath
- Flexible stainless steel cable Ø 1 or 1,2 mm
- Strong spring mechanics
- Precision cable drum
Inkrementaler Weggeber PLE 85 / PLE 115
Linear Motion Transducer up to 15.000 mm range, with Standard Incremental Encoder ED 58
Used encoder
Used encoder
Type explanation
PLE 85-25-12/ED58-6-8192-05-D-RC12
| Measuring range | 25 = 2.500 mm |
| 50 = 5.000 mm | |
| 75 = 7.500 mm | |
| 100 = 10.000 mm | |
| 150 = 15.000 mm | |
| Encoder type | Incremental |
| Number of channels | 3 = A + B + M |
| 6 = AA + BB + MM | |
| Resolutions | xxxx = Impulse pro Umdrehung |
| Supply voltage | 05 = 5 VDC ± 5% |
| 30 = 10..30 VDC | |
| Output driver | D-RS422 |
| P | |
| Position of connection | R |
| S | |
| Connector | C07 = 7 pins Binder |
| C12 = 12 pins M23 | |
| M10 = 10 pins MIL |
Technical data
Close all lists Open all listsMechanical data
| Acceleration of cable | ≤ 30 ms-2 (PLE115-100, PLE115-150) |
| ≤ 50 ms-2 (PLE85-25, PLE115-50) | |
| ≤ 60 ms-2 (PLE115-75) | |
| Side movement of cable | ≤ 3° |
| Weight | ≈ 1,3 kg (PLE 85) |
| ≈ 1,7 ... 3,7 kg (PLE 115) |
Environmental conditions
| Vibration | 200 ms-2 (20 ... 2000 Hz) |
| Shock | 500 ms-2 |
| Operating temperature | 0 ... +80°C |
| Storage temperature | -40 ... +80°C |
| Atmospheric humidity | ≤ 95% r.h. |
| Protection class | IP 65 (Standard Encoder ED 58) |
| IP 40 (Mechanic of Linear Motion Transducer) |
Electrical data
| Scanning type | Optical, without contact |
| Transmitter, infrared | LED |
| Receiver | Photo-Array |
| Supply voltage | Vcc = 5 VDC ±5% |
| Vcc = 10...30 VDC | |
| Power consumtion | 200 mA max. |
| Output frequency | ≤ 300 kHz (Output D) |
| ≤ 160 kHz (Output P) | |
| Signal level | High > Vcc -2 V |
| Low < 0,5 V | |
| Load capacity of the outputs | 20 mA |
Cable
| Wire colour | Signal |
|---|---|
| Brown 0,5 mm² | +Vcc |
| Blue | +Vcc Sense 1) |
| White 0,5 mm² | 0 V GND |
| White | 0 V Sense |
| Brown | Signal A+ |
| Green | Signal A- 2) |
| Grey | Signal B+ |
| Pink | Signal B- 2) |
| Red | Signal M+ |
| Black | Signal M- 2) |
| Shield | N.C. |
1) nur bei Vcc = 5 VDC TTL
2) nur bei 6 Ausgangskanälen
2) nur bei 6 Ausgangskanälen
Connector 7 pinsBinder
| Connection | Signal |
|---|---|
| Pin 1 | 0 V GND |
| Pin 2 | N.C. |
| Pin 3 | Signal A |
| Pin 4 | Signal B |
| Pin 5 | +Vcc |
| Pin 6 | Signal M |
| Pin 7 | Shield |
Connector 12 pins M23
| Connection | Signal |
|---|---|
| Pin 1 | Signal B- 1) |
| Pin 2 | +Vcc Sense 2) |
| Pin 3 | Signal M+ |
| Pin 4 | Signal M- 1) |
| Pin 5 | Signal A+ |
| Pin 6 | Signal A- 1) |
| Pin 7 | N.C. |
| Pin 8 | Singal B+ |
| Pin 9 | Shield |
| Pin 10 | 0 V GND |
| Pin 11 | 0 V Sense |
| Pin 12 | +Vcc |
1) nur bei 6 Ausgangskanälen
2) nur bei Vcc = 5 VDC TTL
2) nur bei Vcc = 5 VDC TTL
Connector 10 pins MIL
| Connection | Signal |
|---|---|
| Pin A | Signal B+ |
| Pin B | Signal A+ |
| Pin C | Signal M+ |
| Pin D | +Vcc |
| Pin E | +Vcc Sense |
| Pin F | 0 V GND |
| Pin G | Shield |
| Pin H | Signal B- 1) |
| Pin I | Signal A- 1) |
| Pin J | Signal M- 1) |
1) nur bei 6 Ausgangskanälen
Output driver
Outline drawing
Version ZE 612-411 · Subject to change