Manual Encoder EEM 70
Manual pulse generator with magnetic click-stop, flange with central thread, protection IP 65 at front, resolution up to 10.000 pulses / revolution
Resolution
Resolution (Pulses/Revolution):
| 1 - 6000 | 7000 | 7200 | 7500 |
| 8000 | 8192 | 9000 | 9144 |
| 10000 |
Type explanation
EEM 70-4-0100-05-D-RK
| Encoder type | Incremental |
| Flange diameter | ø 62 mm |
| Case diameter | ø 62 mm |
| Number of channels | 2 = A + B |
| 4 = AA + BB | |
| Resolutions | xxxx = Impulse pro Umdrehung |
| Supply voltage | 05 = 5 VDC ± 5% |
| 30 = 10 .. 30 VDC | |
| Output driver | D-RS422 |
| P | |
| Position of clamps | RK = Terminal clamps at rear |
Technical data
Close all lists Open all listsMechanical data
| 2 Kugellager | |
| Torque | 3 ... 20 Ncm |
| shaft loading | 15 N radial |
| 10 N axial | |
| Weight | ≤ 0,7 kg |
Environmental conditions
| Vibration | 100 ms-2 (20 .. 2000 Hz) |
| Shock | 1000 ms-2 (11 ms) |
| Operating temperature | -0 ... +80°C |
| Atmospheric humidity | ≤ 85% r.h. |
| Protection class | IP 65 at front |
| IP 50 at rear |
Electrical data
| Scanning type | Optical, without contact |
| Transmitter, infrared | LED |
| Receiver | Photo-Transistor |
| Supply voltage | Vcc = 5 VDC ±5% |
| Vcc = 10...30 VDC | |
| Power consumtion | 200 mA max. |
| Output frequency | ≤ 300 kHz (Output D) |
| ≤ 160 kHz (Output P) | |
| Signal level | High > Vcc -2 V |
| Low < 0,5 V | |
| Load capacity of the outputs | 20 mA |
Output driver
Outline drawing
Version E 530-410 · Subject to change