- Stainless steel housing Ø 100 x 160 mm
- Optional water- or air-cooling, electrical heating
- against condensing of humidity
- Protection IP 67

Robust Encoder AWG 101 / ED 58
Optical incremental encoder AWG101, For operation at rough conditions
Resolution
Resolution (Pulses/Revolution):
Jede Auflösung von 1 - 6000 | 7000 | 7200 | 7500 |
8000 | 8192 | 9000 | 9144 |
10000 | |||
Every other resolution up to 500 000 on request |
Type explanation
AWG101 /ED58-6-2500-30-P-RC12
Robust Encoder | AWG101 |
Stainless steel housing | Yes |
Encoder type | Incremental |
Flange diameter | ø 100 mm |
Case diameter | ø 100 mm |
Number of channels | 3 = A + B + M |
6 = AA + BB + MM | |
Resolutions | xxxx = Impulse pro Umdrehung |
Supply voltage | 05 = 5 VDC ± 5% |
30 = 10..30 VDC | |
Output driver | D-RS422 |
P | |
S | |
Position of connection | R |
S | |
Connector | C12 = 12 pins M23 |
M10 = 10 pins MIL | |
Shaft diameter | ø 10 mm |
Technical data
Close all lists Open all listsMechanical data
Rotational speed | ≤ 5000 min-1 |
Breakaway torque | ≤ 15 Ncm |
Loading of bearings | 1500 N radial |
1000 N axial | |
Angular acceleration | ≤ 104 rad/sec2 |
Weight | ≤ 6 kg |
Case | Stainless steel 1.43.01 / AISI 304 |
Sealings | Viton |
Environmental conditions
Vibration | 200 ms-2 (50 Hz / 1h) |
Shock | 2000 ms-2 (11 ms) |
Operating temperature | 0 .. +80°C standard |
-40 .. +200°C optional | |
Atmospheric humidity | ≤ 95% r.h. |
Protection class | IP 67 (DIN 40050/IEC 144) |
Electrical data
Scanning type | Optical, without contact |
Transmitter, infrared | LED |
Receiver | Photo-Transistor |
Measurement accuracy | ± 1' standard |
Supply voltage | Vcc = 5 VDC ±5% |
Vcc = 10...30 VDC | |
Power consumtion | 200 mA max. |
Output frequency | ≤ 300 kHz (Output D) |
≤ 160 kHz (Output P, S) | |
Signal level | High > Vcc -2 V (Output D, P) |
Low < 0,5 V (Output D, P) | |
Analog 1 Vss (Output S) | |
Load capacity of the outputs | 20 mA, kurzschlußfest, verpolungssicher Short-circuit proof, protection against reverse connection of supply voltage |
Cable
Wire colour | Signal |
---|---|
Brown 0,5 mm² | +Vcc |
Blue | +Vcc Sense 1) |
White/Green | 0 V GND |
White | 0 V Sense |
Brown | Signal A+ |
Green | Signal A- 2) |
Grey | Signal B+ |
Pink | Signal B- 2) |
Red | Signal M+ |
Black | Signal M- 2) |
Shield | N.C. |
1) nur bei Vcc = 5 VDC TTL
2) nur bei 6 Ausgangskanälen
2) nur bei 6 Ausgangskanälen
Connector 12 pins M23
Connection | Signal |
---|---|
Pin 1 | Signal B- 1) |
Pin 2 | +Vcc Sense 2) |
Pin 3 | Signal M+ |
Pin 4 | Signal M- 1) |
Pin 5 | Signal A+ |
Pin 6 | Signal A- 1) |
Pin 7 | N.C. |
Pin 8 | Signal B+ |
Pin 9 | Shield |
Pin 10 | 0 V GND |
Pin 11 | 0 V Sense |
Pin 12 | +Vcc |
1) nur bei 6 Ausgangskanälen
2) nur bei Vcc = 5 VDC TTL
2) nur bei Vcc = 5 VDC TTL
Connector 10 pins MIL
Connection | Signal |
---|---|
Pin A | Signal B+ |
Pin B | Signal A+ |
Pin C | Signal M+ |
Pin D | +Vcc |
Pin E | +Vcc Sense |
Pin F | 0 V GND |
Pin G | Shield |
Pin H | Signal B- 1) |
Pin I | Signal A- 1) |
Pin J | Signal M- 1) |
1) nur bei 6 Ausgangskanälen
Output driver



Outline drawing

Version E 620-304 · Subject to change