Display Modules

Multifunctional display modules for the connection of one or two incremental or absolute encoders. Red glowing 8-digit, 7-segment LED display with 14 mm high digits. Up to 8 programmable control inputs and up to 16 programmable switching outputs, 1 programmable analog output with up to 16-bit resolution can be operated as a voltage output -10 .. +10 V or current output -20 .. +20 mA. Parallel interfaces for data entry and transfer of data to a PLC or large display. All inputs and outputs are brought out via optocouplers.

RS232, RS422/RS485 interfaces and CANBUS for connecting a display module to a PC or to interconnect up to 32 display modules on a bus. Housing for panel mounting with rear pluggable terminal strips. All display modules are also available as a desktop unit in a rugged aluminum housing for use in workshops and on measuring stations

Display Modules

Multifunctional display module for the simultaneous connection of two incremental and / or absolute encoders. Red glowing 8- digit, 7- segment LED display with 14 mm high digits. 2 SSI interface for absolute encoders and signal inputs for 2 incremental encoders with 3 or 6 channels. The scale factor, the decimal point and the zero point are fully programmable. 8 programmable control inputs and 16 programmable outputs. 1 programmable analog output with 16 -bit resolution can be operated as a voltage output -10 .. +10 V or current output -20 .. +20 mA. All inputs and outputs are led out via optocouplers. RS232, RS422/RS485 interfaces and CANBUS for connecting a display module to a PC or to interconnect up to 32 display modules on a bus. The supply voltage is 10..30 VDC. The housing is provided for panel mounting and electrical connection is made available via a rear pluggable terminal strip.


Multifunctional display module for the connection of an incremental or absolute encoder. Red glowing 8- digit, 7- segment LED display with 14 mm high digits. SSI interface for absolute encoders and a signal inputs for incremental encoder with 3 or 6 channels. The scale factor, the decimal point and the zero point are fully programmable. 6 programmable control inputs and 9 programmable switching outputs. 1 programmable analog output with 16 -bit resolution can be operated as a voltage output -10 .. +10 V or current output -20 .. +20 mA. A parallel input for data entry in Gray, binary or BCD code and a parallel output for data output in Gray code, binary or BCD code. All inputs and outputs are led out via optocouplers.
RS232, RS422/RS485 interfaces and CANBUS for connecting a display module to a PC or to interconnect up to 32 display modules on a bus. The supply voltage is 10..30 VDC. The housing is provided for panel mounting and electrical connection is made available via a rear pluggable terminal strip.


Display module for connecting an absolute encoder with SSI interface. Red glowing 8- digit, 7- segment LED display with 14 mm high digits. The scale factor, the decimal point and the zero point are fully programmable. A programmable control input and a control input to store the display value. Four switching outputs that can be programmed as a threshold switch, cam switch or pulse switch. The switching thresholds and hysteresis are adjustable. An analog voltage output -10 .. +10 V and an analog current output -20 .. +20 mA. The resolution of the D / A converter is 14 bits. Over a 24-bit parallel input setpoints can be entered for the switch outputs in Gray, binary or BCD code. Over a 24-bit parallel output of the display value in gray, binary or BCD code can be output. All inputs and outputs are led out via optocouplers. An RS485 interface allows reading the position data and the status of all inputs and outputs. In addition, all parameters can be set. The supply voltage is 10..30 VDC. The housing is provided for panel mounting and electrical connection is made available via a rear pluggable terminal strip.

 


Display module for connecting an incremental encoder. Red glowing 8-digit, 7-segment LED display with 14 mm high digits. Encoders can be connected with 3 or 6 channels with push-pull outputs or RS422 Line Driver. The scale factor, the decimal point and the zero point are fully programmable. A programmable control input and a control input to store the display value. Two switching outputs that can be programmed as a threshold switch, cam switch or pulse switch. The switching thresholds and hysteresis are adjustable. The inputs and outputs are led out via optocouplers. The supply voltage is 10 .. 30 VDC. The housing is provided for panel mounting and electrical connection is made available via a ru¨ckseitige pluggable terminal strip.


to Top